5 Simple Tips to Installing Slate Tile
Installing slate tile is simple, if you are prepared to do a little work and have the true do-it-yourself spirit. If you follow the five tips below you should easily be on your way to a beautiful new floor.
Tip 1: It is recommended that you purchase more tiles than you will need to complete your project. Slate tiles have the tendency to break. Keep in mind you will need extra tiles for trim around corners.
read this also : The three main types of wood flooring.
Tip 2: It is recommended that you prepare your floor by checking to see that slate tilethe floor on which the tile will go is flat. To do this, put a straight edge on the floor and checking for gaps between it and the floor. Mark gaps on the floor; clean the area and paint it with latex primer. Pour self-leveling mortar over the area, then smooth with straightedge.
Tip 3: Before mixing the mortar do a trial layout. This allows you to utilize fewer slate tiles and cut as few as possible.
When mixing the mortar, mix only what you can use before it hardens. Start by mixing enough to fill a 3 1/2 quart bucket, then adjust the amount as you gain experience. Keep the mortar sticky, if the mortar won’t stick to your fingers, it won’t stick to the tiles.
Tip 4: Set tiles by hinging down, twisting slightly back and forth, then placing spacers and sliding into the final position. Spacers should be placed on end so they can easily be removed. If you use them flat, you can use fewer spacers but they are much harder to remove.
Tip 5: Damp cure the grout by misting with water twice a day for three days. Do not damp cure tinted grout. Damp curing can dissolve the tint and leave an inconsistent color. When grout is thoroughly dry, apply tile and grout cleaner with a sponge, then scrub the surface with a stiff brush. Rinse and dry before applying sealer.
source : How to Install Slate Tile